CNC Router

From VoidWarranties - Hackerspace Antwerp, Belgium
(Difference between revisions)
Jump to: navigation, search
(05/08/2012)
Line 293: Line 293:
 
*To be continued...
 
*To be continued...
 
--[[User:Tom|Tom]] 13:50, 5 August 2012 (CEST)
 
--[[User:Tom|Tom]] 13:50, 5 August 2012 (CEST)
 +
 +
==06/08/2012==
 +
*The first attempt to get the cnc connected has succeeded.
 +
*This is done with replicatorG version 25 and the xml provided by Kefcom and Hexman. (have to look at the two files and check for differences. If there are any)
 +
*Further testing upon connection issues will go on through the day.
 +
*If this is succesful, next up is uploading G-code and see if it works.
 +
*To be continued...

Revision as of 15:16, 6 August 2012


CNC Router
What:
Figuring out requirements and workflow restrictions for a CNC router
Router.jpg
Participants:
User:Ivom, Jeffrey, Yashiko, Jobj, Yvanj, tomvdz, Tom
Category:
Crafting


Contents

Requirements

  1. Milling regular PCBs with non-SMD IC components should be possible with are fair margin
  2. Bits for milling MDF, stryrofoam HDPE and nylon should be possible
  3. Sub 1000 euro budget limit, including a set of drill bits matching our initial goals

5 crucial project ideas to pull this off

  1. cutting PCB circuit boards (resolution limits between two layers of 0.2 mm and 0.8 mm)
  2. prototyping custom boxes for the Nanode and Arduino kits people own
  3. engraving nametags, labels, equipment
    1. the Voidwarranties logo is the first to go: online barcode creator,
    2. transform the image to dxf
    3. mill it on acryl add some neon or LED-light
    4. mount it outside the josto-building
  4. cutting out mechanical parts for robottics.
  5. for furniture restoration: 3D scanning woodcarvings and recreate missing pieces.
  6. making models, molds, spare parts wich could be hard and/or expensive to come by.
  7. miniature furniture for the doll house, then scale it by a factor 10 and, goodbye IKEA shopping horrors.
  8. de houten spatel van de space is serieus aan vervanging toe en mag gelijk van het VW logo voorzien worden. Als het werkt millen we er een 20-tal.

Oops that make 8 :)

Meta project level

  1. the shear pleasure of learning new skills and the satisfaction to make it
  2. actually work and implement your design (-> insert education workshops here)
  3. researching the feasability to convert the cnc router to a touchsensor 3D scanner

Please add additional thoughts on Talk page

Found products

Selection: MiniCnc, made at TimeLab Gent

caption

Research by Jeff

The last days we've discovered some problems when milling PCB's. The accuracy of the CNC router seems to be pretty good, however it seems that our current milling bits are not suitable to perform the job. The ball point milling bit gives smooth tracks without sharp edges, but the milling width is heavily influenced when the PCB surface isn't flat. The other fine milling bit could not deliver smooth tracks due to sharp edges.

Another problem is the production of fine dust (and noise). It's certainly not healthy to breath in small copper particles so we really need to make an isolated box asap.

Thanks to the great insights of Kris Wauters I suggest the following todo's:

progress log

29/02/2012

ivom, tomvdz, sorry-forgot-your-name

07/03/2012

Tomvdz, Jeffrey,Ivom

14/03/2012

Jeffrey, tomvdz, ivom

CNC router

-spheric milling bit, 1mm -speed F66 -depth -0.1mm (0.2mm will be fine too) -accuracy: very fine to 1mm distance between lines -no rough edges

test 1


-pointed drilling bit -speed F66 & F30 -different depths: from 0.2mm to 0.4mm -accuracy: +- 0.25mm, but edges are too rough and unclean

test 2 & 3
test 4
G21 ; millimeters of course!
G90 ; absolute position, no opto-end stops...
;G91 ; relative position, no opto-end stops...
G92 X0 Y0 Z0 ;huidig pos = oorsprong
 
G00 Z05.000 ;boor omhoog
G1 X10 Y10 F66 ;begin pos 1ste lijn
G1 Z-0.4 F66 ;boor omlaag
G1 X30 Y10 F30
G1 X30 Y20 F30
G1 X10 Y20 F30
G1 X10 Y27 F30
G1 X30 Y27 F30
G1 X30 Y32 F30
G1 X10 Y32 F30
G1 X10 Y34.54 F30
G1 X30 Y34.54 F30
G1 X30 Y37.08 F30
G1 X10 Y37.08 F30
G1 X10 Y38 F30
G1 X30 Y38 F30
G1 X30 Y38.75 F30
G1 X10 Y38.75 F30
G1 X10 Y39.25 F30
G1 X30 Y39.25 F30
G1 X30 Y39.5 F30
G1 X10 Y39.5 F30
 
;G1 X10 Y110 Z-1.0 F66
 
G1 Z+5.0 F66
G1 X0 Y0 Z+5.0 F66

21/03/2012

24/03/2012

G01 X47.4486 Y61.9125 Z-0.3000
 Z1.0000
G00 X51.6819 Y72.4958 Z1.0000
G01 Z-0.3000
G01 X52.3875 Y72.4958 Z-0.3000

28/09/2012

CNCtux1.jpg
CNCtux2.jpg
CNCtux3.jpg

04/04/2012

11/04/2012

Jeffrey, Ivo

dremel runout
result with new bit

19/052012

TomVerlinden, Ivom

23/05/2012

TomVerlinden, Ivom

28/05/2012

Ivom

Een vierkant test: Test op horizontaal correct geschaald en of er nog wat mankeert aan de horizontale vlakheid....

G21 ; millimeters of course!
G90 ; absolute position, no opto-end stops...
;G91 ; relative position, no opto-end stops...
G92 X0 Y0 Z0

G00 Z03.000
G1 X10 Y10 F50
G1 Z-0.7 F50
G1 X160 Y10 F50
G1 X160 Y160 F50
G1 X10 Y160 F50
G1 X10 Y10 F50
;tweede vierkant
G1 X110 Y10 F50
G1 X110 Y110 F50
G1 X10 Y110  F50
G1 X10 Y10 F50 

G1 Z+1.0 F50
G1 X0 Y0 Z+1.0 F50

27/06/2012

05/08/2012

--Tom 13:50, 5 August 2012 (CEST)

06/08/2012

Personal tools
Namespaces
Variants
Actions
Navigation
Toolbox
Content Creation
Belgian Spaces