From Voidwarranties - Hackerspace Antwerp, Belgium
Revision as of 10:06, 23 July 2014 by Berz (Talk | contribs)
Jump to: navigation, search

In a hackerspace a computer is needed everywhere, included behind the bar. So this project was born.
Beer computer-300x290.jpg
Koen, Koert
Den Bunker





The computer is situated in the corner at the end of the bar. Its audio jack is connected to the amplifier next to it to play music.


The touchscreen is located at the other end of the bar and is connected to the case through a USB cable for the input devices and a VGA cable for the output (screen).




Install the needed packages:

sudo apt-get install xserver-xorg-input-elographics xserver-xorg-input-evdev-dev utouch sudo apt-get install xinput-calibrator

Recognize the device at boot

echo 'inputattach -elo /dev/ttyS2' >> /etc/rc.local

Calibrate the touchscreen, and put the output here: /usr/share/X11/xorg.conf.d/99-calibration.conf


This is the config I last used, but if you've got smaller finger feel free to optimize it:

Section "InputClass"
Identifier	"calibration" MatchProduct	"Elo Serial TouchScreen" Option	"Calibration"	"4015 -4 6 4026"


The technical aspect of the setup is documented here, if you just want to play some music, check out How to play music

We use MPD (Music Player Daemon) as a music server. This allows us to use various clients at the same time, including over the network and on portable devices.

MPD can play audio streams. The list of streams is populated by scanning /home/barputer/Music/streams Aditionally MPD scans for music in /home/barputer/Music/shares. However no music is kept on barputer, and we intend to keep it this way. Instead, this directory is dynamically populated by mounting available music directories over the network.



Raf is the name of the script that mounts the shared music dirs, and is an abbreviation of Remote Audio Folders. It scans the network for available samba shares, keeps only those whose name contains the string 'music' to prevent mounting the wrong shares, mounts and updates the MPD library if necessary. It also scans if all the mounted shares are still accessible and unmounts them if they are not. Raf is invoked automatically by cron, keeping the MPD library up to date.

If you're impatient, you can force a sync by executing the following command on barputer:

# RAF sync

To add music to the MPD library we originally used djmount, a program which automatically mounts UPNP shares. This setup was copied from Whitespace and is documented here.

Point of sales & Stock management

Using the vwcr application made by Koert. It's not completely finished yet, but it can be used (and is being used).



Every once in a while we make a full snapshot. These are full images that can be restored to the drive. The last image was made on 17/05/'12. The images are made using FSarchiver. We can't use Norton Ghost or Clonezilla since they don't have support for EXT4, which we use for barputer's root filesystem. Backup procedure:


A backup of all the files on the root drive is taken every hour. These backups are rotated. Every fifth hourly backup is kept for 25 hours and is called a 'recent' backup. Every fifth recent backup is kept for 125 hours and called a 'medium' backup. Every fifth medium backup is called an 'old' backup and is kept indefinably. One hour in this context refers to an hour the computer is turned on. The snapshots are made and rotated automatically.

This scheme uses rsync for snapshotting, rsnapshot for rotating, and space usage is kept down using hardlinks (every version of a file is only saved once).

$ sudo du -hs /media/backup/incremental/*
4.0K	/media/backup/incremental/counter
3.8G	/media/backup/incremental/hourly.0
138M	/media/backup/incremental/hourly.1
71M	/media/backup/incremental/hourly.2
123M	/media/backup/incremental/hourly.3
72M	/media/backup/incremental/hourly.4
82M	/media/backup/incremental/young.0


*MOAR DOCUMENTING (on this page and How to play music)

Personal tools
Content Creation
Belgian Spaces